Band Saw Tires Keep Coming off

If you’ve ever used a band saw, you know that one of the most important parts of the tool is the tire. The tire helps to keep the blade in place and also provides traction so that the blade can move smoothly. Unfortunately, band saw tires have a tendency to come off, which can be frustrating and even dangerous.

There are a few things that you can do to try to prevent this from happening, but sometimes it’s just inevitable. Here’s what you need to know about band saw tires and why they keep coming off.

If your band saw tires keep coming off, there are a few possible causes. First, check to see if the tires are properly inflated. If they’re not, inflate them to the proper pressure and try again.

If that doesn’t work, the next step is to check the alignment of your blade. It’s possible that the blade is slightly misaligned, causing it to rub against the tire and eventually cause it to come off. Adjusting the blade should fix this problem.

Finally, if neither of these solutions works, it’s possible that the problem lies with the band saw itself. In this case, you’ll need to take it to a professional for repairs.

Dnlk Band Saw Tires

Dnlk Band Saw Tires are made from natural rubber and provide superior performance and durability. They are designed for use on all types of band saws, including those with carbide-tipped blades. Dnlk Band Saw Tires resist wear and tear better than other brands, making them ideal for long-term use.

Band Saw Tires Keep Coming off


Why Does My Bandsaw Blade Keeps Coming Off?

There are a few reasons why your bandsaw blade may keep coming off. The first reason is that the teeth on the blade may be worn down. When the teeth become worn, they can no longer grip the wood properly and will slip off.

Another reason is that the tension on the blade may be too loose. If the tension is too loose, the blade will vibrate and eventually come off. Finally, the guide bearings may be worn out.

The guide bearings help to keep the blade in place and if they are worn out, the blade will not stay in place and will come off.

What Adhesive Works for Bandsaw Tires?

If you’re looking to replace the tires on your bandsaw, you might be wondering what kind of adhesive to use. There are a few different options available, and it really depends on personal preference. Here are a few popular choices:

1. Rubber Cement – This is a cheap and easy option that can be found at most hardware stores. It’s not the strongest option, but it will get the job done. 2. Super Glue – This is a stronger option than rubber cement, but can be messier to work with.

3. Epoxy – This is the strongest option, but also the most expensive and difficult to work with. If you’re experienced with epoxy, though, it can provide a very strong bond.

Do Bandsaw Tires Need to Be Glued?

Bandsaw tires need to be glued in order to keep them properly positioned on the blade. Over time, the glue can break down and cause the tires to become loose, which can lead to vibration and premature wear. If your bandsaw tires are starting to come loose, it’s best to re-glue them as soon as possible.

Do Urethane Bandsaw Tires Need to Be Glued?

No, urethane bandsaw tires do not need to be glued. They are designed to hold up against the blade without slipping or coming off.



If your band saw tires keep coming off, it’s likely because they’re not properly installed or they’re the wrong size. Make sure to consult your band saw’s manual for the correct tire installation procedure and size. If you still have trouble, take your band saw to a professional for help.

Add a Comment

Your email address will not be published. Required fields are marked *